|
<< Click to Display Table of Contents >> Navigation: »No topics above this level« Appendix D: Compatible Abaqus versions |
After installing CONVERGE, you can use an Abaqus solver while running CONVERGE. The compatibility between CONVERGE and Abaqus versions are listed below in Table 20.
Table 20: Abaqus versions compatible with CONVERGE.
Qualified Abaqus version |
CONVERGE 3.0.x |
CONVERGE 3.1.1-3.1.6 |
CONVERGE 3.1.7+ |
CONVERGE 4.0.0+ |
CONVERGE v5.0.0+ |
CONVERGE v6.0.0 |
2017x |
Yes |
Yes |
|
|
|
|
2018x |
Yes |
Yes |
|
|
|
|
2019x |
|
|
Yes |
Yes |
|
|
2020x |
|
|
Yes |
Yes |
|
|
2021x |
|
|
Yes |
Yes |
|
|
2022x |
|
|
Yes |
Yes |
|
|
2023x |
|
|
|
|
Yes |
Yes |
2024x |
|
|
|
|
Yes |
Yes |
2025x |
|
|
|
|
Yes |
Yes |
2026x |
|
|
|
|
Yes* |
Yes* |
*Requires manual extraction of api.
You may use GT-SUITE to model Flow, FSI, or CHT coupling at a boundary. The compatibility between CONVERGE and GT-SUITE versions are listed below in Table 21.
Table 21: GT-SUITE compatible with CONVERGE.
|
GT-SUITE v2026 |
GT-SUITE v2025 |
GT-SUITE v2024 |
GT-SUITE v2023 |
GT-SUITE v2022 |
GT-SUITE v2021 |
GT-SUITE v2020 |
CONVERGE |
v6.0.0 v5.0.0+ v4.0.0+ |
v6.0.0 v5.0.0+ v4.0.0+ |
v6.0.0 v5.0.0+ v4.0.0+ |
v6.0.0 v5.0.0+ v4.0.0+ v3.1.6+ v3.022 v3.0.20 v3.0.16-v3.0.19* v3.0.15 v2.4.21 v2.4.13 |
v6.0.0 v5.0.0+ v4.0.0+ v3.022 v3.0.20 v3.0.16-v3.0.19* v3.0.15 v2.4.21 v2.4.13 |
v6.0.0 v5.0.0+ v4.0.0+ v3.0.20 v3.0.16-v3.0.19* v3.0.15 v2.4.21 v2.4.13 |
v6.0.0 v5.0.0+ v4.0.0+ v2.4.21 v2.4.13 |
*These CONVERGE solvers feature an altered startup sequence compared to earlier CONVERGE 3.0 builds that can cause the first coupled timestep to be ill-conditioned in GT-SUITE. This may interfere with the startup or cause the simulation to fail. This problem was corrected in version 3.0.20.